Hewlett Packard Enterprise aruba, Руководство по устранению неисправностей, Страница: 26 / 41

Instant APs Managed by AirWave | 26
Check if the AP can Download the Image File from AirWave
Run the debug-download <url> command to check whether the AP can access the image file. If the
connection to the download url fails, ensure that there are no issues in the network connectivity. The URL
for the download file uses the following syntax:
https://<AirWave IP>/flash/<Image file name> .
The following is an example of the debug-download command:
Instant AP)# debug-download https://106.120.89.90/flash/ArubaInstant_Cassiopeia_6_4_2_0_
4_1_1_2_47823_0.bin
AP Fails to Download Certificates from AirWave
The following procedure describes how to troubleshoot issues, if the AP fails to download certificates from
AirWave:
1. Check AirWave Operation Mode
2. Check the Certificates Installed on the AP
Check AirWave Operation Mode
Ensure that AirWave management mode for the AP is Manage Read/Write .
Run the show ap debug airwave command in the CLI of the AP to view details of AirWave server. Check
the Mode column to identify the management mode of AirWave.
The sample below displays details of the AirWave server, generated by the show ap debug airwave
command:
Airwave Server List
-------------------
Domain/IP Address Type
Mode
Config-only Rapids-mode Status
----------------- ---- ---- ----------- ----------- ------
1.1.1.1 Primary
Manage
- No Not connected
----------------- ---- ---- ----------- ----------- ------
The AP cannot download certificates from AirWave if the management mode is set to Monitor-
only+Firmware Upgrades . The following procedure describes how to change the management mode of
AirWave:
1. Navigate to the Devices > List page in the AirWave UI.
2. Right-click on the device and select Manage to open the Manage page.
3. Under General , select Manage Read/Write.
4. Click Save & Apply .
Check the Certificates Installed on the AP
Run the show cert all command in the CLI of the AP to view certificates installed on the AP. Check if the AP
received new certificates from AirWave.
The sample below displays certificate details of the AP, generated by the show cert all command:
(Instant AP) # show cert all
Current Server Certificate:
Version :2
Serial Number :ECD686866B183D17
Issuer :/C=CN/ST=Beijing/O=Aruba Networks/O=an HP company/OU=Aruba Instant/CN=Feng Ding
Subject :/C=CN/ST=Beijing/O=Aruba Networks/O=an HP company/OU=Aruba Instant
(Server)/CN=www.fding.com
Issued On :Jun 12 07:04:18 2018 GMT
Expires On :Jun 9 07:04:18 2028 GMT