
14|
Aruba IAP-3XX Wireless Access Points with Aruba Instant Firmware FIPS 140-2 Level 2 Security Policy
Bluetooth Low Energy (BLE) radio:
Bluetooth: up to 3dBm transmit power (class 2) and -92dBm receive sensitivity
DC power interface:
12V DC (nominal, +/- 5%)
2.1mm/5.5-mm center-positive circular plug with 9.5-mm length
Antenna interfaces:
802.11a/b/g/n/ac three external antenna (IAP-304) or three internal antenna (IAP-305)
Other Interfaces:
Visual indicators (two multi-color LEDs): for System and Radio status
Reset button: factory reset (during device power up)
Serial console interface (proprietary; optional adapter cable available; disabled in FIPS mode by TEL)
Table 3 -
I
AP-300 Series Status Indicator LEDs
LED Type
Color/State
Meaning
System Status (Left)
Off
AP powered off
Green/Amber
Alternating
Device booting; not ready
Green - Solid
Device ready
Amber - Solid
Device ready; power-save mode (802.3af PoE):
* Single radio
* USB disabled
Green or Amber
Flashing
Device ready, restricted mode:
*
Uplink negotiated in sub optimal speed; or
*
Radio in non-high throughput (HT) mode
Red
System error condition
Radio Status (Right)
Off
AP powered off, or both radios disabled
Green - Solid
Both radios enabled in access mode
Amber - Solid
Both radios enabled in monitor mode
Green/Amber Alternating
One radio enabled in access mode, other in monitor mode