Hewlett Packard Enterprise Aruba 9012, Руководство по установке

Страница: 12 / 26

12
| 9012 Gateway
Aruba 9012 Gateway
| Installation Guide
Figure 4 Serial Console Port Pin-Out
The communication settings for the RJ-45 console port is shown in the following table:
Serial Console Port Adapter
A modular adapter can be used to convert the female RJ-45 connector to a male DB9 connector.
See Figure 5 for complete details.
Figure 5 RJ-45 (Female) to DB9 (Male) Modular Adapter Conversion
USB Port
The Aruba 9012 gateway is equipped with two USB 3.0 interfaces. A USB storage device can be
used to save and upload configurations to the gateway.
The Aruba 9012 gateway also provides support for USB LTE Modems. These modems can be
connected to either USB Port 0 and Port 1. When two modems are connected simultaneously, the
modem that gets registered with the device first, will be in use. To use the second modem,
Table 6
RJ-45 Console Terminal Settings
Baud Rate Data Bits Parity Stop Bits Flow Control
9600 8 None 1 None
Serial
Console Port
1
2
3
4
5
6
7
8
TxD
GND
RxD
RJ-45 Female
Pin-Out
Direction
Input
Output
GND
The RJ-45 CONSOLE port is compatible only with RS-232 devices. Non-RS-232 devices, such as APs, are not
supported.
Do not connect the RJ-45 Console port to an Ethernet switch or a PoE power source. This may damage the
gateway.
3
4
5
2
5
6 3
RJ-45 DB-9
Internal
Connections
TxD
GND
RxD
1
2
3
4
5
6
7
8
TxD
GND
RxD
RJ-45 Female
Pin-Out
DB-9 Male
Pin-Out
TxD
RxD
Ground
5
4
3
2
1
9
8
7
6