MF877-00 Page 2
Template Revision B, 18-Nov-2016
HPE instructions for this template are available at
Item Description
Notes
Quantity
of items
included
in product
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torque Driver (Standard)
T10 & T25
Torque Bit
T10-70 mm
Torque Bit
T25-89mm
Torque Bit
M4 Philip Head
Cutter
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove PULL OUT
2. Unscrew and remove - SCREW-MACHINE ASSEMBLY M5 X 0.8 10M ROHS
3. Unscrew and remove - SCREW-THD-RLG M3 X 0.5 5MM-LG ROHS at 14 Locations and CHASSIS COVER
4. Remove INSULATOR, PSU TOP nPoE FXD from CHASSIS COVER
5. Cut and remove – CABLE TIE at 1 location
6. Unplug - AC connector from POWER SUPPLY
7. Unplug – Cable connect between POWER SUPPLY and ASSY, 48NP FIXED PCA + MECH
8. Unplug – FAN connector from ASSY, 48NP FIXED PCA + MECH
9. Unplug – 0.5mm CENTRE FFC CABLE 24 CKTS from PCA, USABILITY LED BOARD
10. Remove – FAN CABLE from COVER, COMMON DIVERTER NP
11. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 4 locations and POWER SUPPLY
12. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 2 Locations and SHIELD PSU CABLE
13. Unplug – 0.5mm CENTRE FFC CABLE 24 CKTS from ASSY, 48NP FIXED PCA + MECH
14. Unscrew and remove - SCREW T10 M3X6 at 2 locations
15. Remove - PCA, USABILITY LED BOARD
16. Remove - PUSHBUTTON, SMT, MODE SWITCH
17. Unscrew and remove -
SCREW-MACHINE M4X0.7 6MM LG
18. Unscrew and remove -
SCREW-TAPPING PL FH M4X1.75 8MM LG at 6 Locations and FAN
19. Unplug and remove - AC socket from CHASSIS
20. Unscrew and remove - SCREW-TAPPING M3 X 0.5 8MM-LG ROHS at 11 Locations and ASSY, 48NP FIXED PCA +
MECH
21. Remove - INSULATOR, PSU BOTTOM nPoE FXD from CHASSIS
22. Remove - INSULATOR, PULL TAB GUIDE from CHASSIS
23. Remove – COVER, COMMON DIVERTER NP from CHASSIS