3
INTRODUCTION
Thank you for purchasing the Hetronic radio remote
control system. Hetronic radio remote controls are the
highest caliber in remote control value, performance
and safety.
Hetronic radio remote controls use the latest frequency
synthesizer technology to eliminate the problems
typically associated with radio remote control systems.
THE MANUAL
Before operation of the crane/machine and remote
control system, read your manuals carefully and
completely. The contents of this manual will provide
you with an understanding of safety instructions and
controls during normal operation and maintenance.
PRODUCTION AND SYSTEM NUMBERS
When contacting your dealer or Hetronic about service,
repair or replacement parts, know the Production and
System numbers of the transmitter and receiver.
The numbers are located on the label that is affixed to
the unit itself.
Record the Production and System numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Hetronic replacement parts. The replacement
of any part with anything other than a Hetronic
authorized replacement part may adversely affect the
performance, durability, and safety of this system and
may void the warranty. Hetronic disclaims liability for
any claims or damages, whether warranty, property
damage, personal injury or death arising out of the use
of unauthorized replacement parts.
BEFORE ATTEMPTING TO OPERATE THIS
SYSTEM:
1. Make sure all installation has been properly
completed.
2. Understand all safety precautions provided in the
manuals.
3. Review control functions and operation of the
crane/machine and this radio remote control
system.
4. When not in use, remove the transmitter batteries
and store in a safe place to prevent unauthorized
use.
5. If the crane/machine does not respond properly,
stop operation immediately. Remove the
transmitter batteries and report the condition to
the appropriate technician or supervisor.
6. Remove the transmitter batteries and disconnect
power to the receiver before any maintenance
work is done.
7. When using rechargeable batteries always have
batteries in the battery charger to ensure the
availability of fully charged batteries.
8. Installation, setup and service must be performed
by authorized personnel only.
9. Use only Hetronic spare parts.
1
2
3
5
4
1. Specific approvals such as BTZ, FCC, CE, etc.
2. The type of transmitter or receiver.
3. Frequency and RF unit.
4.
Production Number
- The first digit indicates the
manufacturing facility (1=H-Germany, 2=H-Malta,
3=H-US, 4=H-International). The next four digits
are the production month and year. The last 6
digits are the manufacturing number.
5.
System Number
- The Hetronic part number of
the transmitter or receiver.
Transmitter Production Number
Receiver Production Number
System Number
INTRODUCTION
PRELIMINAR
Y COPY
