Heta SCAN-LINE GREEN 300, Инструкция по эксплуатации

Страница: 8 / 28

8
Climate
EN
INSTALLATION
1. Connect the Wi-Fi module to the power supply:
LED (a) must be lit and not flashing.
2. Connect the Wi-Fi module to the pellet stove using the cable provided:
LED (b) must be lit and not flashing. If it flashes, there may be communication
problems with the pellet stove� Make sure the pellet stove is connected to
the power outlet and the switch is on�
3. Wi-Fi communication:
LED (c) must be lit to confirm a connection between the
app and the server�
4. Hardware reset button (d): Press this button if errors persist and restart the
configuration.
If the device is offline during normal operation, press the configuration button
for 3 seconds. During configuration and operation, the LEDs can change from
lit to flashing.
Power
flashing
error
lit oK
COM
flashing
no connection to the pellet stove
lit connection oK
Wi-Fi
flashing Wi-Fi is not configured
lit Wi-Fi connected
Power/Wi-Fi
flashing configuration in progress