![Heta Scan-Line 900 SCA Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/heta/scan-line-900-sca/scan-line-900-sca_operating-and-installation-instructions_2127628009.webp)
9
1.11 operational problems
The chimney must be swept at least once a
year, we recommend the use of a NACS (natio-
nal association of chimney sweeps) registered
chimney sweep.
In the event of smoke or malodorous fumes are
being produced, you must first check to see
whether the chimney is blocked.
The chimney must, of course, always provide the
minimum draft necessary to ensure that it is pos-
sible to regulate the fire. Please note, how-ever,
that chimney draft is dependent on the weather
conditions. In high winds, the draft can become
so powerful that it may be necessary to fit a dam-
per in the flue gas pipe to regulate the draft.
When cleaning the chimney, soot and other
deposits may come to fall on the baffle plate,
remove and clean it. In cases where the wood
burns too quickly, this may be due to excessive
chimney draft. You should also check to make
sure that the door seal and ash pan seal is intact
and correctly fitting. If the stove it generating
too little heat, this may be because you are firing
with wet wood. In this case, much of the heat-
ing energy is used to dry the wood, resulting in
poor efficiency, potentially damaging the vermi-
culite and an increased risk of soot deposits in
the chimney.
1.12 Chimney fire
In case of a chimney fire, which often results from
incorrect operation/maintenance or prolonged
use of damp wood, close the door and the air
supply completely, to help slow/smother the fire.
Call the fire department. The stove and chimi-
ney must be inspected before use again.
1.13 Maintenance
The surface of the stove is treated with a heat-
resistant paint. The stove should be cleaned
with a damp cloth.
Any damage to the surface in the form of chips
or scratches can be repaired using touch-up
paint, which is available in spray can
1.14 Cleaning the glass
Incorrect firing, for example using wet wood,
can result in the viewing window becoming co-
vered in soot. This soot can be easily and effec-
tively removed by using proprietary stove glass
cleaner.
1
2
3
4
5
1.15 Cleaning the oven
Remove and clean baking racks and rails. The
oven should be cleaned with mild oven cleaner.
See fig. 1-5.