Heta Oura Series Скачать руководство пользователя страница 7

7

The chimney must be swept at least 

once a year, we recommend the use 

of a NACS (national association of 

chimney sweeps) registered chim-

ney sweep. In the event of smoke or 

malodorous fumes being produced, 

you must first check to see whether 

the chimney is blocked. The chim-

ney must, of course, always provide 

the minimum draught necessary to 

ensure that it is possible to regulate 

the fire.  Please note, however, that 

chimney draft is dependent on the 

weather conditions. In high winds, the 

draft can become so powerful that it 

may be necessary to fit a damper in 

the flue gas pipe to regulate the draft. 

When cleaning the chimney, soot and 

other deposits may come to fall on the 

smoke turning plate.

  

In cases where 

the wood burns too quickly, this may 

be due to excessive chimney draught.  

You should also check to make sure 

that the door seal is intact and cor-

rectly fitting.

If the stove it generating too little heat, 

this may be because you are firing 

with wet wood. In this case, much of 

the heating energy is used to dry the 

wood, resulting in poor heating eco-

nomics and an increased risk of soot 

deposits in the chimney.

OPERATIONAL PROBLEMS

MAINTENANCE

The surface of the stove has been 

trea-ted with heat-resistant paint.

The stove should be cleaned with a 

damp cloth. Any damage to the sur-

face in the form of chips or scratches 

can be repaired using touch-up paint, 

which is available in spray cans.

Cleaning the glass

Incorrect firing, for example using 

wet wood, can result in the viewing 

window becoming covered in soot. 

This soot can be easily and effectively 

removed by using proprietary stove 

glass cleaner.

Содержание Oura Series













Отзывы: