21
CARE & CLEANING
MACHINE CLEANING
After regular use, residual grinds and oil
build up in the machine can affect coffee
extraction. We recommend performing a
cleaning cycle every 2-3 months using the
cleaning tablet provided.
To perform a cleaning cycle:
1.
Insert the silicon disk into the
portafilter.
2.
Place the cleaning tablet on the
silicon disk (position in the centre).
3.
Insert the portafilter into the group
head and rotate to right to lock in
position.
4.
Ensure Power On/Off button is on.
5.
Turn the dial to the ‘Espresso’
position for 20 seconds.
6.
Turn the dial back to the ‘Standby’
position.
7.
Repeat steps 5-6 three times or until
the cleaning tablet is dissolved.
DESCALING
Even if you are correctly using the water
filter provided, we recommend you to
descale when you see scale build-up in
the water tank.
Visit Sage webpage to purchase
“the Descaler”.
1.
Ensure the Control Dial is in the
‘Standby’ position, the machine is
switched off.
2.
Remove the filter holder.
3.
Empty one sachet (25g) into 1 litre of
warm water, stir to dissolve.
Pour solution into the water tank.
4.
Press the POWER button to switch the
machine on.
5.
Place a large container under both the
Group Head and the Steam Wand.
6.
Set the Control Dial to the ‘Espresso’
position and let half the descale
solution run through the Group Head.
7.
Set the Control Dial to the ‘Steam’
position and allow the remaining
solution to run through the Steam
Wand. When the liquid stops flowing,
set the Control Dial back to the
‘Standby’ position.
8.
After descaling, remove the water tank
and rinse thoroughly then refill with
fresh cold water. To rinse the machine,
repeat steps 5 – 8.
20172069 P22 BES810BSS_UKM_IB_E17_HiRes.pdf color:2C K+PANTONE 518C ZB2382 DC:- SIZE:148X210MM August 18, 2017 14:18:34