©2019 Hestan Commercial Corporation
3
EN
LEFT PANEL REPLACEMENT
(CONTINUED)
5. Remove the last 2 screws at the
left-bottom of the cart as shown
in Fig. 5. Panel should come
off by pushing from the inside
toward the exterior of the unit.
Re-assembly is the reverse
process. It is recommended to
install all screws by hand, and
NOT use a drill-driver or screw
gun. It is very easy to strip the
threaded holes.
FIG. 2
RIGHT PANEL REPLACEMENT
6. When viewed from the front,
remove 7 screws shown in Fig. 6.
FIG. 6
FIG. 7
7. When viewed from the rear access
areas, remove 3 screws shown in Fig. 7.
FIG. 5