©2019 Hestan Commercial Corporation
5
EN
PART REPLACEMENT - PAPER TOWEL DISPENSER
(CONTINUED)
2. Reach inside to remove 2 screws at rear
edge of door, then 2 screws and handle.
The entire inner panel with towel holder
walls will come out (Fig. 5).
FIG. 5
FIG. 6
3. Remove the textured panel insert by removing
all the internal screws as shown in Fig. 6.
4. Re-assembly is the reverse process. It is
recommended to install all screws by hand, and
NOT use a drill-driver or screw gun. It is very
easy to strip the threaded holes.
