18
HE 5712 Operating Instructions
# 372048 | Version 1.4
5.
Electrical Commissioning
Before switching on the device, observe the following points:
Connect the cable firmly to the glands.
The power supply must correspond to the voltage indicated on the nameplate.
The device may only be operated in closed condition.
The temperature restrictions specified for the use of the device must be observed
before and during operation.
Ensure that the FE conductor is connected.
The patch cable between the control unit and the operating unit may only be
plugged/unplugged when switched off.
5.1
Safety Information
Danger of Electrocution!
Electrical installation must only be carried out when the power is
disconnected.
Warning of material damage caused by electrostatic charge!
Observe the safety measures according to BS EN 61340-51/-3 to avoid
electrostatic discharge!
Note!
Work on the electronics may only be carried out by qualified personnel.
