7
Safety instructions
The brake must be engaged when you
• stop the pram, even if it is only for a short time
• sit the child up in the pram or take it out
Engaging and releasing the brake with 250 mm rims
Engaging and releasing the brake with 300 mm rims
When using wheels with a 250 mm rim, the brake can be engaged by
pushing the brake rod down with the foot and released by reversing
this action and pushing the rod up .
When using wheels with 300 mm rims, the brake rod must be
engaged by pushing the straight part of the rod .
The so-called u-brake is released by stepping on the opening
(=u-angle) of the brake rod.
Installation of the wheels
You can select one of two rim sizes during purchase
• 250 mm
• 300 mm
as well as 3 tyre types
• black pneumatic tyres LR
• black air chamber tyres without tyre tube SL
• white EVA tyres
Remove the plastic cover from the frame shafts. Keep for future storage.
Warning
Danger of suffocation. Keep the plastic covers and plastic bags outside the reach of children.
Make sure that the brake system is re-
leased. Press the bar at the wheel
hub and hold it while pushing the
wheel onto the shaft . Release
the bar and pull the wheel to-
wards you until you hear it click
in place. Pull again to ensure that
the wheel is secured. Repeat this
procedure for all four wheels.
2. Pram – brake and installation of wheels
