HES HS7003B, Руководство пользователя

Страница: 19 / 31

CHAPTER 6 MAINTENANCE
6-1 HOW TO MAINTAIN THE MACHINE
1) Please keep surface of machine clean. Do not use volatile
solvent to clean, such as gasoline, toluene, etc.
2) HMA inside melting tank will get charred and aged after a period
of heating, please change HMA regularly for ensuring coating
quality.
3) Please do not run the motor while doing maintenance to avoid
hands being rolled by roller.
4) Once cloth or any impurity fall into melting tank during
operation, please clean it out. Those stuff will affect glue
coating.
5) Always wear the protective glasses, clothing and
heat-resistant gloves to avoid being burned by hot surface of
components or molten glue.
6) Regularly smear some lubricant on chain and gear.
6-2 HOW TO CLEAN THE ROLLER AND CHANGE HMA
6-2-1 THE WAY TO CHANGE HMA
1) This melting tank coated by Teflon, so the surface is
non-adhesive and easy to clean.
2) Heat roller and tank at the same time, and ensure HMA is melted
completely. Then raise the back of machine around 15 degree
to make HMA flow to front of tank, subsequently turn off power
to cool down HMA.
3) When temperature of HMA is down to 50~60
℃
, take out the HMA
from tank by hands.
4) Please heat the rest of HMA, and then use cloth to clean it.
5) Surface of melting tank coated by Teflon, please do not scratch
it by any sharp tools. It may cause bad separation effect.