Fill Screws
CONTENTS
Desktop Enclosure
Removable Cable Port Cover
Cable Port Damping Foam
2.5 mm Hex Wrench -
Accessory
UNPACKING THE SYSTEM
−
Remove top of large box. Remove box's outer walls. Remove enclosure from
packing bag. IMPORTANT: Save all packing materials for subsequent use.
−
Place enclosure on rigid desk or table. CAUTION: The enclosure is heavy (95+ lbs);
two people should lift the enclosure using handles on side. NOTE: Do not support
enclosure weight with the door, as doing so can adversely affect the door’s
alignment.
−
Disengage latch and open enclosure door. Remove accessory wrench.
SWITCHING DOOR ORIENTATION
−
The door can be hinged on the right or left side,
depending on which orientation is preferable for
continued use. The switch can be easily accomplished
using the 2.5 mm hex wrench provided in the
accessory bag. Remove the hex wrench from the
accessory bag.
−
Use wrench to detach fill screws from door and body of enclosure. There are twelve
fill screws total. Keep fill screws for subsequent reattachment
