19
Owner’s Manual
9.7
Bluetooth Operation
Select Bluetooth as Playing Source
1.
Press
/
SCR
to access the SOURCE SELECTION menu.
2.
Rotate
VOL/SEL
knob to highlight
BT
, press to select
Enable Bluetooth in your streaming device and scan for nearby devices, select HMR 20 from your list of
available devices to connect
Pair Bluetooth Device
Remark:
Playing order will depend on Bluetooth audio player. When
is pressed some A2DP devices will restart the
current track depending on the duration of the playback. Some Bluetooth audio players may not allow play / pause
synchronization with this unit. Please make sure both the device and the main unit are in the same play / pause
status in BT Music mode.
1
When the device is connected short press to go into BT Setting.
2
Press
VOL/SEL
knob to disconnect the device.
-
Press
to pause the track/song that is currently playing.
-
Press
to resume playing the track/song that has been paused.
1
When the device is disconnected short press to go into BT Setting.
2
Press
VOL/SEL
knob to connect the device.
-
Press
to move on to the previous track/song.
-
Press
to go back to the next track/song.
Disconnect Current Device
Play / Pause
Connect Last Device
Select a Track
WARNING:
please avoid operating your connected mobile phone while audio streaming as this may
cause noise or stuttering on the song playback. Audio streaming may or may not resume after
telephone interruption as this depends on the mobile phone used.
BT:
Mark’s iPhone
12.5 V
1:13 / 3:44 07 of 10
Song name
Artist name
Album name
