11
Owner’s Manual
9.2
Radio Operation
Select Tuner as Playing Source
Press
SRC
button to select the Tuner mode.
Global Tuner
This unit is initially set to USA frequency intervals of 10KHz for AM and 100KHz for FM.
When using it outside the USA, the frequency reception range can be switched to the intervals below.
Select the Radio Band
Press
BAND
button to select one radio band from FM1, FM2, FM3, AM1, AM2.
Preset station selection
-
short press
SEEK -
to move to the previous preset.
-
short press
SEEK +
to move to the next preset.
SEEK Tuning
-
long press
SEEK -
to SEEK the previous strongest station.
-
long press
SEEK +
to SEEK the next strongest station.
Manual Tuning
short press
AS
button to enter manual tuning.
-
the display shows
MANUAL
(the system reverts to
AUTO
mode after a few seconds if no button is pressed).
-
press
SEEK -
or
SEEK +
to manual tune the desired frequency (the system reverts to
AUTO
mode after a
few seconds if no button is pressed).
Auto Store
Only stations with sufficient signal strength will be detected and stored in the memory.
Press and hold the
AS
button to automatically find the first 18 strongest stations and store them into presets.
The new stations replace any stations already stored in the band.
Save a preset
Tune the desired station / frequency and then press and hold
button, the preset number starts to blink.
Use the
SEEK
buttons to select desired preset number then long press
button to save it.
USA
Standard
Europe
Standard
AM
Frequency
spacing
10KHz
9KHz
Frequency
range
530 - 1710KHz 522 - 1620KHz
FM
Frequency
spacing
100KHz
50KHz
Frequency
range
87.5 -
107.9MHz
87.5 - 108MHz
