•
A
n “adaptive start”
function to optimise energy used to start each programmed period (Optional with
Purchase of T1 Thermostat).
The Herschel iQ control systems were created specifically for Infrared heating with this legislation in mind and
therefore satisfy the requirements. See Appendix 1 for full details. For other controls, you will have to consult
with your dealer.
If used as a portable heater using Inspire Feet, the Herschel Inspire is only suitable for well insulated spaces or
occasional use and
must
use a room temperature control such as the Celect T33.
On first use the Inspire picture panels may emit a slight odour. This is normal and represents the colours in the
picture curing. The colours will be unaffected and the smell will disappear in a short time.
Please note it is possible the heater may discolour with use - this is caused by air born pollution and is not a fault.
Clicking noises caused by thermal expansion are also common and will not affect the heating function.
The heater is designed to last many years and incorporates several safety functions, but if the heater has not
been used or installed in adherence to these instructions, emits any noise, smells or reaches high temperatures
in excess of 100°C, discontinue using the heater and refer to your local Herschel dealer.
WARRANTY:
Register your product here:
https://www.herschel-infrared.com/customer-service/warranty-registration/
Within ten years from date of purchase Herschel will repair or replace the
heater where the fault is due to defects in materials or workmanship. In the
event of a warranty claim please consult your local dealer and return the heater
together with proof of purchase.
A prerequisite for validity of the warranty is use at the specified supply voltage
of the heater and use in accordance with the conditions specified in this
manual. Any further warranty or claims are excluded.
The warranty covers the repair or replacement of the defective product only and Herschel shall have no liability
for installation costs or consequential loses however incurred.
Removing the serial number will void the warranty. The warranty will also be void if the heater has been
tampered with or opened in any way.
The product power label must be left on the panels where they can be accessed after installation if necessary.
Herschel Infrared Ltd will assume no responsibility for scratches on surface or frames after first use.
Herschel Infrared Ltd cannot accept responsibility for damage, loss or injury caused by ingress of water or
moisture, accidental damage, mishandling, external impact, adjustment by unauthorised personnel or failure to
follow the correct maintenance and safety precautions as stated in the manual.
Refer to Herschel Infrared Ltd’s
warranty policy for full details. See
https://www.herschel-infrared.com
Note your serial number for future
reference:
