Exploded View
Hawaii 2000
Curved Top Pole
M5x12mm Allen
Screw
Bottom Pole
4x M6x10mm
Allen Screws
Base Plate
Clip
M8 Eye Bolt
4x M6 Split
Washers
Feed the cable up through the hole in the bottom
of the base plate. Feed the end with the small
connector not the 3-pin plug end.
Now feed the cable up through the bottom pole
so that it end up hanging our of the top. Start at
the end with the fixing plate.
Fix the bottom pole to the base plate using the
four M6x10mm screws and the M6 split washers.
Step 1
The top curved pole will arrive with the cable and
plug fitted. Connect the cable from the bottom
pole to the cable from the top pole and then slot
the top pole into the bottom pole.
Using the M5x12mm allen screw locate the hole
on the back below the join and fit the screw. You
will require a 3mm allen key for this.
Step 2
Insert the M8 eye bolt into the threaded hole
located at the top of the curved pole.
Using the clip, attach the Hawaii 2000 to the eye
bolt.
Plug in the top of the cable to the Hawaii making
sure to line up the pins correctly. Screw the two
halves together sealing the inside of the plug.
Step 3
Page 2 of 2
