XVR package installations plug and play, no need to set.
Start the installation guide step into:
Step 1: Installation Preparation
Install XVR hard drive. Before installation, make sure that the power is turned off.
Installation tools: Cross screwdriver (please use the device manufacturer recommended XVR dedicated
monitoring hard drive)
XVR rear panel interface description：BNC Video input, CVBS Video output, Audio output, VGA Video
output interface, HD video output interface, Audio input, Ethernet port, USB2.0 port, RS485 connection
PTZ, power input, as below：
(1) Loosen the screws that secure the sides and
back of the cover and remove the cover.
(3) Align the screw holes on the hard disk with
the screw holes on the base plate and tighten
the hard disk to the bottom with screws.
(2) Plug in the hard drive cable and power cable.
(4) Align the cover against the base and gently
close it. Tighten the top .
Notes: The picture is for reference only, the
fi
nal product to prevail in kind
Note
s: Image for instruction use only, the final goods are subjected to the real object.
power input
BNC Video output
Product Rear Panel Description
XVR Kits Quick Operation Guide
