HERO SPLENDOR i Smart, Руководство пользователя, Страница: 22 / 76

19
2. Stop the engine & park the motorcycle on
its main stand on level ground, remove the
oil level dipstick and wipe it clean.
3. Reinsert the oil level dipstick without
screwing it in and check the oil level.
4. If required, add the specified oil up to the
upper level mark. Do not overfill.
5. Quantity of oil to be filled is 0.80 litre
(approx.) during oil changes.
6. Reinstall the oil level dipstick and check
for oil leaks.
1
2
(2) Sealing washer
Drain the engine oil with the engine warm
and the motorcycle on its main stand.
1. To drain the oil, remove the oil level
dipstick and drain plug (1).
oil level dipstick.
Fill the crankcase through the filler
hole with approximately 0.80 litre of
the recommended grade oil.
After the oil has completely drained,
reinstall the drain plug with a new
sealing washer (2).
6. Stop the engine and let the engine oil
settle down.
7. Recheck the oil level.
8. Make sure that oil level is at the upper
level mark of the oil level dipstick with
the motorcycle in an upright position,
and that there are no oil leaks.