HERO S2650, Руководство пользователя

Страница: 9 / 23

9
Safety Instructions
Please read the instructions carefully before installing and operating the shaker, as a
personal safety measure as well as to avoid needless damage to the equipment.
HERO declines any responsibility should the following instructions not be followed:

Do not turn ON a damaged machine (for example, if the machine is damaged
during transportation). If in doubt, first contact
HERO’s service department.

Position and connect the machine by carefully following the installation instructions
and by respecting the conditions stated in this manual.

All the instructions and local safety regulations must be observed.

The machine must only be connected to a wall electrical socket installed according
to regulations, with the grounding circuit and the voltage value in compliance with
what is written on the machine
’s information plate.

The machine must be connected to a dedicated electrical circuit, with no other
electric devices connected to it.

The shaker must be installed into an area in compliance with local standard rules. It
could be necessary the request of an authorization from local competent authority.

In order to avoid accidents to personnel, verify that all the removable covers are
correctly assembled and fixed, except in case of maintenance operations.

In case of emergency, press the red button for the emergency stop.

Utilization and maintenance of the Automatic Shaker Machine must be done by
authorized and specialized personnel. Any improper utilization, or incorrect
maintenance, could be the causes of dangerous situations or accidents.

Utilization and maintenance of the Automatic Shaker Machine must be done by
authorized and specialized personnel. Any improper utilization, or incorrect
maintenance, could be the causes of dangerous situations or accidents.

Any service on the machine, other than routine, can only be carried out by a
qualified technician. Make sure that the power cable is not plugged into the socket
while the machine is being repaired.

The user must maintain the machine in good working condition and replace any
broken components.

The machine is not explosion-proof or flameproof. Do not load the machine with
inflammable or explosive substances; do not use inflammable or explosive
substances for the cleaning of the machine.

Do not store any inflammable substances or any other dangerous substances into
the machine or in the area immediately surrounding the machine. The area where
the machine has to be installed must be clear by flames, incandescent light sources
or any other devices that could generate sparks.