Applying Brakes
Hero medical seat walkers are equipped with ergonomic brakes that are easy to apply and use.
Following is a step by step guide on how to apply the brakes and hand brakes.
1.
Apply brake – hold the grip firmly and the pull the brake upwards until sufficient brake
has been applied
2.
Hand brake – apply pressure downward until brake locks into place, to release hand brake
use a cupped can to disengage lock
Sitting on the Walking Frame
1.
Visually inspect walker to ensure there is no visible damage before sitting on walker
2.
Please ensure that the hand brakes are in the locked position by following the steps listed
in applying brakes.
3.
Please ensure you are on a stable surface.
4.
Turn facing backwards the walker and hold both handles firmly, move back until your legs
touch the walker and slowly lower yourself onto the walker.
5.
Please ensure that your weight is centered and not to sway your body weight from side to side
Maintenance
Wipe this product over with a warm damp cloth and wipe dry
1.
A tension adjustment nut is located at the point where the brake cable inserts into the brake
handle. There is also a tension adjustment at the other end of the brake cable where it inserts
into the brake mechanism near the rear wheel.
These adjustment nuts can be used to tighten the cable or loosen if brakes are too tight and
not allowing the rear wheels to roll freely.
2.
Brakes are adjusted to the optimal tension during manufacturing and should not require
adjustment when new. Over time as rear wheels wear and reduce in diameter, brakes will
become loose and will need to be tightened
SWL : 113kg
• Please ensure your fingers are clear from pinch points when operating.
Independent Living Specialists PTY LTD
Unit 1 /12 Mars Rd,
Lane Cove NSW 2066
1300 008 267
ilsau.com.au
UNIT WEIGHT
MAX S.W. L.
OVERALL HEIGHT
SEAT HEIGHT
SEAT WIDTH
OVERALL LENGTH
FOLDED WIDTH
OVERALL WIDTH
SEAT DEPTH
BACKREST HEIGHT
CASTOR SIZE
76-93cm
64 cm
79 cm
29 cm
29 cm
49-59 cm
79 cm
27 cm
4.75 kg
6”
113kg
S13781/ S14858
