34
PRE-RIDE INSPECTION
For your safety, it is very important to take a
few moments before each ride to walk around
your vehicle and check its condition. If you
detect any problem, be sure you take care of it
or have it corrected by your
Authorised
Distributor/Dealer
.
case of adjustment required please follow the
steps as given below.
•
Park the vehicle on main stand on a
level ground in front of a wall.
•
Turn the ignition to “ON” position ( ).
•
Loosen the bolt (1) and move the
headlamp up (A) or down (B) for correct
focus.
(1) Bolt (A) Up (B) Down
WARNING
!
!
An improperly adjusted headlamp may blind
oncoming driver or it may fail to light the road
for safe distance.
1
•
Disconnect the headlamp connector (5)
and remove the headlamp case.
•
Pull the headlamp case slightly up, carefully
release the tabs from the slots.
4
(3) Screws (4) Rear handlebar cover
(5) Headlamp connector
3
5
Installation
Installation is in the reverse order of removal.
(Vertical adjustment)
Headlamp focus is factory preset. However in
(i) Headlamp focus adjustment
A
B
Содержание PLEASURE+
Страница 4: ......