background image

Kidsflex - Disabled Child Car Seat 

 
 

General Information 

 

The Kidsflex Disabled Child Car Seat is designed to be used as a restraint system 
for  disabled  children  when  travelling  in  a  car,  it  is  suitable  for  installation  in  most 
cars. 

 

The car seat is designed for use in the back seat of a car and requires a functioning 
vehicle mounted 3-point seat belt. 

 

The  seat  can  be  installed  and  used  on  the  passenger  side  or  on  the  driver  side 
(location to be specified at purchase). 

 

In addition to the vehicles 3-point seat belt, the Kidsflex car seat is equipped with a 
5-point support harness, with both shoulders, lap and crotch strap, to provide added 
support for the child. 

 

Options are available to offer added postural management and support for the child 
where needed. 

 
 

ATTENTION 

 

The Kidsflex child seat is tested and approved for forward facing installation 
in a rear seat position only. 
The distance between the child

s head and the interior roof lining must be 

a least 60mm. 

 
 

How to Use 

 

Your Kidsflex car seat is supplied assembled. 

 

On delivery your dealer should unpack and check the seat, ensure adjustments are 
made to suit the vehicle, and fit the seat in accordance with the Instructions. 

 

If fitted with the Stabilizer Bracket, this must be adjusted to the relevant vehicle, the 
seat will then be located by pushing the stabilizer bracket into the gap between the 
backrest and cushion of the vehicles rear seat. 

 

If fitted with our Isofix option, this must be adjusted to the relevant vehicle, the seat 
will then be located by latching onto the vehicles Isofix locations (Note: this Isofix 
option is for stability / location purposes, the vehicles 3-point seat belt must always 
be used to secure the child). 

 

In  order  to  achieve  the  optimal  seating  position,  it  will  be  necessary  to  adjust 
the seat to the child

s size and requirements. These adjustments should always 

be carried out by your dealer. 

 

After instruction, the appropriate person, in the presence of the dealer, should 
perform all functions, as well as installation and removal of the car seat. 

 
 
 

-3- 

Содержание KIDSFLEX














Отзывы: