background image

USER MANUAL

1

Caution

Please consult the professionals before installation or repairing. The company takes no liabilities for any damage or 

injuries that occur during the installation of the pipes, floor, wall and tub.

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under

-

standing, installing, and application of the product. Please have this user manual well-reserved 

for future reference.

Before Installation

      

Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us. 

       Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving 

       the factory. 
       Shut off the main water supply before the installation.
       Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
       Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to 
       the left and the cold water pipe to the right. 
       Check for leaks and make sure every joint is safely sealed after the installation, 
       Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it 

       into use.

SKU:H200114

Single Hole Kitchen Basin Faucet

Содержание H200114

Страница 1: ...rt is missing or damaged please contact us Do not disassemble the main body as it has been installed commissioned correctly precisely before leaving the factory Shut off the main water supply before the installation Do flush the water supply lines to remove any dirt and debris before installation IMPORTANT Make sure to connect the hot cold inlet pipe correctly If standing in front usually the hot w...

Страница 2: ...1 0Mpa General Flow 0 1Mpa 0 9 0L min Hole size 33 35mm 1 3 1 4 in diameter 2 Basic Parameter Part List Cold Hot inlet hose Sealing ring Shank Rubber mat Washer Lock nut Faucet 1 1 1 1 1 1 2 Quantity Number Item Standardaccessory Check the parts ...

Страница 3: ...ble hole 2 Set up table lock group through the water inlet hose respectively to the main faucet and tighten them on the shank of the main body and tighten the two locking screws with a screwdriver Table Table 3 After finishing the faucet installation connect the inlet angle valve according to the item 5 connection diagram of the cold hot water inlet hose and angle valve Installation Instruction Tab...

Страница 4: ...ne wrench to rotate nut of the hose and use another wrench to prevent the inlet hose from twisting 2 After the connection the inlet hose should not be bent twisted or stretched to avoid leadage or breaking and other dangers For more detail information please check out www hernest com It will be our pleasure to have your visit After Sale Service If you have any issues with the product please feel f...

Отзывы: