Hermle Sieva-3, Инструкция по эксплуатации

Страница: 23 / 40

OPERATION
© Hermle Labortechnik GmbH
Sieva-3_V1.18_dt
19
4.4.3 Leaving Program Mode
To leave the program mode, press the key, "prog" (11). Then, inside the display "time", appears the
word "programm".
Set the display to "programm--" (M10) with the control field (1).
For all number marked text, please refer to
Figure 20.
4.5 Starting and Stopping the Centrifuge
4.5.1 Starting the Centrifuge
Start the centrifuge with either the "start" key (9), or the "quick" key (8). With the "start" key (9),
stored runs or runs with manually pre-selected parameters can be started. During the centrifugation
the LED light is flashing slowly with red color. When the respective pre-selected running time has
ended, the centrifuge will stop automatically.
By pressing the "quick" key (8), the centrifuge accelerates up to the pre-selected revolution. In the
display "time" (A-3), the passed running time is indicated from the moment the "quick" key (8) is
pressed. By releasing the "quick" key (8), the centrifuge stops and the running time is indicated, until
the lid is opened.
For all number marked text, please refer to Figure 21.
Figure 21
4.5.2 Stopping the Centrifuge
With the "stop" key (10), the run time can be interrupted, at any time, (see Figure 22). After pressing
the key, the centrifuge decelerates with the respective pre-selected intensity, down to a standstill.
After the centrifugation is finished, the LED lights with green color.
Figure 22