Hermes VANGUARD OPTIMA, Руководство пользователя

Страница: 50 / 113

System Operation 5-7
Pressing and holding down an arrow button will cause the focus lens assembly to move in the
respective direction. The motion system starts off slowly, but if you continue to hold down the
button, you will see it accelerate to a faster speed. Pushing the button once and letting it go
quickly will move the motion system in .001 inch increments. Pressing two adjacent buttons will
move the assembly in a diagonal direction. This part of the control panel is primarily used to
position the focus lens assembly directly over the engraving material and to use the focus tool to
set the proper focus height. Other uses for these buttons will be discussed later in this manual.
You must be in the “FILE DISPLAY” menu or the “MAIN” menu for this button to be operable.
Pressing it enables the “ORIGIN POSITION” menu to appear. It also turns on the optional red
laser diode that shows where the focus lens assembly is positioned in the field by shining a
bright red “dot” on the engraving area. Further details on how to use this button will be covered
later in this section.
This button positions the focus carriage slightly away from the upper left hand corner at the
default (1,1) position in the engraving area. This is where the majority of focusing will be done.
Once the focus carriage is positioned, the motion system can still be moved by using the
motion control arrow buttons. Pressing the button again will move the focus carriage back to
the home position in the upper right corner of the engraving area. You can set the default
position to anywhere in the field that you desire. Relocating the focus position is covered later
on in this section.
The Menu System
The LCD displays the menus of the laser system. Since this laser system has many features,
we have included a “Menu System Flow Chart” on the next three pages. It diagrams and
displays the menu items in the entire system and the button selections needed to access them.
A description of each menu item follows the flow chart.