15
After several uses it’s possible that the
device will become dirty due to solid
particles and condensed oils.
• To clean the vaporizer disconnect the
battery or adaptor. The vaporizer will be
easier to clean if done while warm after
use.
• Use the spiral brush to scrub the
solid particles stuck to the walls of the
interior vent and lower screen. In the same
manner clean the basket and the screen
of the flexicone.
• Using a flat screwdriver, push against the
interior filter to extract the cylinder, the
upper interior screens and the Teflon ring
from the vaporization chamber.
Leave them soaking in soapy water or
alcohol. The following can be cleaned the
same way: baskets, liquid filter, flexicone,
fl and metal screens, elbow tube
and mouthpiece.
These pieces are made with materials that
won’t break down due to home detergent,
ethyl alcohol or isopropyl alcohol.
Before reassembling the device, the parts
must be rinsed thoroughly with water. Use
them once they’re dry.
We recommend you replace the flexicone
and fl after approximately 20-30
uses. They can be cleaned just the same
but their color will be more opaque.
You can put the vaporizable materials
directly in the vaporization chamber, but
remember to clean it frequently, as it will
accumulate flavor and residue from previous
vaporizations.
Cleaning sensitive pieces:
filters, cone and mouthpiece
Содержание miniVAP
Страница 1: ...Instruction Manual for miniVAP Vaporizer By HERMES Medical Engineering SL ...
Страница 20: ...www minivap com ...