Hermann Sonda esterna Radio, Руководство по введению

Страница: 12 / 16

0020105669_02 - 08/10 - Hermann
- 10 -
GB
3 Settings
There are three parameters to set in the
heating system:
- the heating curve,
- WKHPD[LPXPÀRZKHDWLQJWHPSHUDWXUH
- the correction of the outdoor
temperature.
It is important that all the settings are
made on all the component parts of the
heating system:
- the Cronocontrol Radio programmable
room thermostat,
- the boiler.
i
The outdoor sensor sends data
on the outside temperature to
the room thermostat (via the
radio receiver) or the control
XQLWHYHU\PLQXWHV
i
Should the connection to the
outdoor sensor be interrupted,
the regulation of the system
ZLOOEHPRGL¿HGDIWHUDSHULRG
RIGD\V
The room thermostat will
PDNHPRGL¿FDWLRQVZLWKRXW
taking into account the outdoor
WHPSHUDWXUHUHDGLQJ
3.1 Adjustment of the heating curve
¿J
Choose the curve(value adjustable
between 0.2 and 4), which allows you
WRREWDLQWKHPD[LPXPKHDWLQJÀRZ
temperature for the usual minimum
outdoor temperature for the region in
which the sensor is installed.
i
Comment: The lower the heat
loss of the house, the lower
the value of the heat curve
required:
>@KLJKO\LQVXODWHG
modern house with low
temperature radiators or
XQGHUÀRRUKHDWLQJ
>§@VWDQGDUGPRGHUQKRXVH
with radiators,
>@ROGHUSURSHUWLHVZLWK
UDGLDWRUV
3.2 6HWWLQJWKHPD[LPXPÀRZKHDWLQJ
temperature.
This function, available on the control unit
and on the boiler, enables the maximum
heating output temperature to be set
(value adjustable between 30 °C
and 80 °C).
‡
Consult the instruction manual of the
boiler.
3.3 Outdoor temperature correction
This function, available on the room
thermostat, enables the temperature
measured by the outdoor sensor to be
corrected (+/- 5 °C at 1 °C intervals).
‡
Consult the Cronocontrol Radio
instruction manual.
INSTALLATION