Adjustment Guide
2
HermanMiller
Verus
™
Chair
To raise or lower arm:
Push button and pull arms up or down
to desired height.
For maximum comfort, your arms should make contact with the armpad
without any lift at your shoulders.
To adjust height on suspension back:
Slide lever up and down to desired
height.
To adjust height on TriFlex back:
Slide adjustable back support up and
down to desired height.
Arm Depth & Width:
Only available on some models.
To adjust arm depth:
Grasp arm pad, push forward or back to
desired position.
To adjust arm width:
Grasp armpad and pull in or push out.
Lumbar Height:
Lever on adjustable lumbar support
Arm Height:
Button located on arm stalk under each arm pad
Only available on some models.
To adjust footring height:
Hold base with one hand,
grasp footring spoke and turn
counterclockwise (-) to loosen.
Once loose, raise or lower footring
to desired height.
Hold collar with one hand, grasp
footring and turn clockwise (+) to
tighten. To secure, finish turning
footring while holding base.
Footring Height:
Only available on Verus Stool.
To position chair forward:
Turn paddle forward, then recline fully.
An audible click will notify when the
seat has changed positions.
To resume horizontal position:
Turn paddle backward, then recline
fully. An audible click will notify when
the seat has changed positions.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks such as keyboarding.
Forward Tilt:
Front paddle on left side of seat
Only available on some models.
