manualshive.com logo in svg

HermanMiller Ubi Work Tools, Инструкции по установке и разборке для последующей утилизации

Поделиться
Скачать
HermanMiller Ubi Work Tools Скачать руководство пользователя страница 12

Z

© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.

Part no. 1BHH19 rev C.

TM

 

Y

, 

L

, Canvas are among the trademarks of Herman Miller, Inc. 

Illustrations and specifi cations are based on the latest product information available at the time of publication. 

The right is reserved to make changes in design and specifi cations at any time, without notice, and also to discontinue products. 

12

4.  Set Shelf assembly at back of work surface. Make sure clamp is tight against 

     back edge of work surface.

5.  Turn clamp knob right to move clamp lever into position.  Continue turning 

     knob to tighten clamp.

1.  

YT300.SNL:

 Remove protective backing from tape on bottom side of fi ller (H).

2.  Align fi ller with shelf surface (G).  Firmly press in place.

3.  

YT300.SNL, YT300.SNM, YT300.SBL, YT300.SBM:

 Turn knob left to loosen 

     clamp lever and position as shown.

G

H

Clamp Lever

Содержание Ubi Work Tools


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды