Assembly Instructions
2
HermanMiller
1BKW6X rev A
Disassembly for Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non
marked components should be treated as mixed plastic. Ferrous metals
can be identified using a small magnet for recycling. Non-ferrous metals
should be separated and recycled separately.
To disassemble product, reverse steps 1.5 through 1.1.
For more information about our products and services please visit us at
hermanmiller.com or call (800) 851 1196.
©2017 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No.
1BKW6X – A
1.3 Position screen assembly up to table at desired location with 1” gap
between screen and edge of table.
1.4 Mark screw holes. Remove screen assembly. Drill pilot holes. Make
sure not to drill through work surface.
1.5 Return screen to table. Secure in place with sheet metal screws.
Work Surface
Screen
1” Gap
Torx Sheet
Metal Screw
Screen
Work Surface
