HermanMiller Thrive Y1116, Инструкции по установке и разборке для последующей утилизации

Страница: 1 / 2

Parts Included
Tools Required
HermanMiller
Thrive Surface Mounted Screen
(Y1116, Y1118) Installation and Disassembly
for Recycling Instructions
How to assemble your Surface Mounted
Screen
Screen
Screen
Cable Trough
RH Screen Bracket (A & B)
Pan Head Machine Screw Torx Sheet Metal Screw
LH Screen Bracket (A & B)
Center Screen Bracket (A & B)
Safety Glasses Phillips Bit Torx Bit Power Driver
Assembly Instructions:
Step 1
Y116 Surface Mounted Screen
1.1 Attach LH & RH Screen Brackets and Center screen bracket to
Screen with pan head screws.
1.2 If screen is to be attached to end of table where a wall attached leg is
installed, switch middle bracket with end screen brackets. This will give
clearence between bracket and leg.
1.3 If Cable Trough is to be installed onto screen, place screen flat on
clean surface. Position brackets onto screen. Place Cable Trough over
brackets. Install pan head screws.
Cable Trough
Pan Head
Machine Screw
Center Screen
Bracket
Screen
LH Screen
Bracket
RH Screen
Bracket
Assembly Instructions 1 HermanMiller 1BKW6X rev A