HermanMiller Renew, Руководство по установке

Страница: 4 / 7

Step 4
Foot Installation
4.1 Attach the Foot (G) to the leg using 2 Socket head cap screws M10 M .
\
I
Step 5
Control Box Installation
5.1 Butt the Control Box (Z) to the inside of the rail and move to a location where all cable
connections will properly attach.
HermanMiller Renew"Table (Height Adjustable - Electrical)
Step 4A
Foot Installation with the Leg with Hidden power assembly
4A.1 Attach the foot (G) to the leg using 2 socket head cap screw M10 M
4A . 2 Attach the power cord to the foot using cable clamp kit.
/�'
Note: The cable clamp kit captures the strain relief as shown above.
Strain Relief
5.2 Attach Velcro "AC" to the worksurface by screwing 2 str i ps of velcro 8" apart with screws "W"
5.3 Attach the control box to the work surface using Velcro .
5.4 Plug in all cords to the control box in the following ord e r .
1. Motor Cable into M1
2. Motor Cable into M2 (then M3 if necessary)
3. Control Switch
4. Power Cord
5.5 Use cable clamps "AB" to secure power cord to the bottom of the work surface, ensuring
the cord does not hang down. Install the first clip 6" from the control box, then every 18" along
the cord.
Note: Use of the Velcro provided will make the control box removable without tools.
Part no. 1 bc4vh rev F.