HermanMiller
Renew
,
. Table Installation
Base product number (DU)
•
How to assemble
your table
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time. without notice, and also to discontinue
products.
For more information about our products and services or to see a list of dealers,
For assistance: Please visit us at www.hermanmiller.com/product•instructions or call 888-443-4357
© 2015 Herman Miller, Inc.. Zeeland, Michigan Printed in U.S.A. Part No. 1bc4vh • F.
™ Renew is among the trademarks of Herman Miller, Inc.
Notice:
Some of the parts have been wrapped to protect them during shipping. Remove the plastic
wrap before assembling the table.
Assemble products on a protective surface.
Tools Required
Power Driver
Philips-Recess Bit
Size:#2
Square-Recess Bit
Size, #2
Hex/Allen
Wrench Size:
Smmand
8mm
Use extension bit if required, Magnetic bits are recommended.
Not all tools are used on all tables.
IMPORTANT SAFETY INSTRUCTIONS
TorxBit
Size,T30
When using an electrical furnishing, basic precautions should always be followed, including
the following:
Read all instructions before using this furnishing.
DANGER - To reduce the risk of electric shock always unplug this furnishing from the
e
lectrical outlet before cleaning
.
WARNING
-
To reduce the risk of burns, fire, electric shock, or injury to persons:
Close supervision is necessary when this furnishing is used by, or near children, invalids, or
disabled persons.
S
itting or standing on product may cause risk of personal injury (use for chairs, tables
consider obvious misuse of product).
Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufa
c
turer
.
Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the furnishing to a service
center for examination and repa
i
r
.
SAVE THESE INSTRUCTIONS
HermanMlller
Renew"Table (Height Adjustable Electrical)
Parts Included
AD
LogicUnit
AE
Clamp
1
AF
Screw
l
•
B
Leg
AA
��ai�
h
Power
D
���t
E
Support Rail
/
��
...
G
C Leg Foot
H
Wire Cover
J
Cable Collector
K
Switch
LI ti ,._
T
'
,.
"'
.,
.. .,
fl""
•
'
'
F
Tlegfoot
L
Retainer Kit
Separates user power
cables from table
power cables
�
N
Machine
p
Glide
R
Tapping Hex
M
Hardware Kit
Screw
Head Screw
S
Tapping Screw
AB
cable Clamp
AC
Velcro
I
' '
T
Lock Washer
V
Socket
W
Tapping Screw
X
Fastener
'
y
Button Head
Screw
,
Z
Control Box
Note: Not all the parts shown above are applicable for all the tables.
Failure to fully tighten screws (bolts) may cause
i
njury by causing Renew tables to collapse.
Tighten screws (bolts) until they stop plus a quarter t
u
rn.
Periodically check to make sure legs are properly aligned. Failure to do so may cause risk of
personal injury.
If using power drive set on low torque.
Keep the cord away from heated surfaces.
Never drop or insert any object into any opening.
Do not use outdoors
.
Do not operate where aerosol (spray) products are be
i
ng used or where oxygen is being
administered.
This furnishing is intended for commercial use
control box rating: 4
.
8A, 120V
Max FPDU rating: 15A
,
120V
Duty cycle: 1min on, 18min off
Part no. 1 bc4vh rev F
Rectangular Work Surface
A
Work Surface Options
Oval Work Surface
Содержание Renew
Страница 2: ......
