HermanMiller
Renew
TM
Bench (Height Adjustable - Electrical)
Assembly Instructions
2
Part no. 1bfnlt rev A.
WARNING
- Risk of Electric Shock – Connect this furnishing to a properly grounded outlet
only. See Grounding Instructions.
For loading always put heavier items in the center and distribute the load.
Maximum load rating is 120 lbs.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product.
if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like
the plug illustrated in Sketch A. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this product.
GROUNDED
OUTLET
GROUNDED
PIN
(A)
Step 1
DU1 Version
End Cover Installation
1.1 Place end cover over the Leg Brace.
B
Step 2
Connector Brackets Installation
3.1 Level DU1 tables by adjusting the 4 glides.
3.2 Tighten the connector bolts securely.
3.3 Place the top cover in place over the leg braces.
3.4 Hold the bottom cover in place and attach with provided hardware using #2 philips.
L - Bracket Installation
2.1 Loosely connect the two DU1 table together using the L - Bracket (D) and hardware (E)
using 1/2” socket, align slots vertically.
2.2 To adjust glides lift edge of table and spin glides with your fingers.
2.3 First focus on leveling the tables independently, then if enough adjustment is available
in the glides level the tables to the adjacent tables.
Step 3
A
