HermanMiller
Assembly Instructions
2
1BJZTY rev B
Step 3
Step 4
Step 6
Step 5
3.1 Align Bag Hook Brackets as square as possible to feet. Attach Bag Hook
Brackets with M8 x 20 Flathead Hex Socket Screw on each foot assembly.
6.1 Position Connector Plates onto Peninsula surface.
6.2 Secure plates to surface with M5 x 12 flathead socket screws.
4.1 Arrange inverted Foot assemblies in proper positions.
4.2 Assemble Toe Rails to mounting brackets and endcaps on foot assemblies
with M8 x 20 Hex Socket Flathead Screws. Tighten screws aft er all have been
started
.
Make sure all Toe Rails are pushed tight together, with no gaps,
before tightening.
Bag Hook
Bag Hook
Toe Rail
Toe Rail
Toe Rail
Bag Hook
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
M8 x 20 Flathead
Hex Socket Screw
Inner Foot
RH End Foot
LH End Foot
Wire Trough
Connector Plate
M5 x 12 Flathead
Socket Screw
5.1 Set Worksurface upside down on clean padded surface.
5.2 Position Wire Trough onto Peninsula Surface.
5.3 Secure Wire Trough to Peninsula Surface with Phillips Button Head Wood
Screws. Be cautious not to strip out holes.
No Gap
