Herman Miller Nelson Bubble Lamp Series
hermanmiller.com/care-and-assembly
Assembly Instructions
2
Part # 1BH75W Rev. A
Pull the wood piece down until it is off the tube and place it on the wall where
you would like the shade to hang. Use drywall inserts if a stud is not available.
Step 3
4,1
Put the screws through the pre-drilled holes in the wood block. You will need to
have an assistant help hold the cord off to the side so you have an obstruction -
free entry into the holes.
4.2
Slide the tube back into the wood block. It will stop at the thin ring attached to
the tube.
Step 4
Slide weight down closer to the floor for a clean cord line.
Step 5
Step 6
Plug power cord into an appropriate outlet and enjoy your Nelson Bubble
Lamp.
