manualshive.com logo in svg

HermanMiller Locale L-Desk, Инструкция по установке и эксплуатации

Поделиться
Скачать
HermanMiller Locale L-Desk Скачать руководство пользователя страница 6

Z

© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.

TM

 Sense, Setu, Tu, Traverse and Locale are among the trademarks of Herman Miller, Inc. 

Illustrations and specifications are based on the latest product information available at the time of publication. 
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 

Part no. 1bch5g rev D.

6

6.  If More than one unit are to be  

     installeded in a run; position adjoining  

     unit next to one already in position.

7.  Level and align that unit to mate with  

     other.

8.  Connect bases with 4 Clamping  

     Screws (C) and 1 Dowel Pin (D).

(Note: View shown with top panel 

removed for clarity.)

C

D

4.  Remove Bottom Shelves from Base.

5.  Level base by adjusting Outside Glides first. Then adjust Inside Glides down  

     to touch floor.

Outside Glide

Inside Glide

Bottom Shelf

Содержание Locale L-Desk
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды