2
HermanMiller
Installation Instructions
1BNR09 rev A
3.1 Take Tip Out stud and insert it into the LEFT circle cutout in the tip
out bin or tray.
Note: The stud must be behind the stop tab.
4.1 Once inserted, use an allen wrench to Apply an axial force
while tightening the screw so that the rubber well nut compresses
on the opposing side. Tighten the screw until snug, but do not
over tighten.
Axial force
View from back side of the tip out stud
Step 4
Step 3
For more information about our products and services please visit us at
hermanmiller.com or call (800) 851 1196.
©2018 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No.
1BNR09 – A
2.1 Once the drawer fronts are adjusted properly, tip back tip out bin
so that circular cutout is just inside the tab in side of cabinet (roughly
45 degrees).
Step 2
