Power Driver
Tools Required
Parts Included
HermanMiller
Canvas Vista Credenza Installation and
Disassembly for Recycling Instructions
How to assemble Canvas Vista Credenza
Tip Out Stud
Storage Leg
1.1 Once cabinet is leveled and in place, adjust the hinges on the tip
out bins to create consistent gaps and alignment of the drawer fronts.
Step 1
#2 Phillips
Bit
Allen wrench
(1/8”)
1.1 Set driver on low torque setting to ensure that the screws do not
strip the wood during installation.
1.2 Place the legs in the corner and align with pilot holes, drive (6)
screws to fasten the legs to storage’s bottom panel.
Step 1
L2CF
L2CFS
1
HermanMiller
Installation Instructions
1BNR09 rev A
