4.1 Place top cap temporarily on frame to adjust gallery panel up
or down to align the top of the panel with the top cap.
5.1 Secure Frame to gallery panel by fully tightening screws.
Plate
Frame
Fastener
Light Seal
(in one of two
positions)
1.1 Complete steps 1-3 above.
1.2 Attach PH40 hooks to gallery panel using #8 screws provided.
1.3 Align panels and lock hooks together.
1.4 Level system before installing additional components.
Assembling 3-Piece Gallery Panels
Step 3
Step 4
Step 5
3.1 Peel off backer tape and attach light seal to edge of frame so the
screw holes are unobstructed. Then adjust glides on gallery panel
to align pilot holes with holes of the wall start and frame and attach
gallery panel with (5) #10 screws provided in hardware kit, not fully
tightening screws.
For more information about our products and services please visit us at
hermanmiller.com or call (800) 851 1196.
©2017 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No.
1BKTM2 – A
Assembly Instructions
2
HermanMiller
1BKTM2 rev A
