
OWNER/OPERATOR RESPONSIBILITY
It is the responsibility of the owner/operator to properly use and maintain this equipment.
The instructions and warnings contained in this manual shall be read and understood by the owner/operator prior
to operating this equipment.
If an owner/operator does not understand English, the contents of this manual shall be explained in the owner/
operator native language to assure the owner/operator comprehends.
It is the responsibility of the owner/operator to maintain the legibility of all warning and Instruction labels.
The owner/operator shall retain this manual for future reference to important warnings, operating and maintenance
instructions.
INSTALLATION
1
Bolt stabilizer feet to the bottom of the stand with the 3/8-16 X 3/4" bolts.
2
Bolt cabinet to stand with the 3/8-16 X 2-1/2" bolts, nuts and washers provided.
3
Assemble the Filter/Regulator assembly using a thread sealer. Note: Make sure that the arrows are
pointing toward the unit (see fig 1).
4
Fill the oiler with 30W non-detergent oil before attaching airline. NEVER REMOVE OILER WITH AIR ATTACHED
5
Route your airline safely to prevent tripping and possible tipping the machine over. Use an unrestricted
airline (no quick connects) at 100-120 psi and 3/8" to 1/2" ID.
6
Attach the 3/4" nipple to the bottom of the unit and select a waste oil container to put under the unit. A
hose may be run from the outlet to a remote container.
7
Turn on air and set regulator to 100-120 psi.
Filter/Regulator
3/8 NPT Air Inlet
Fig. 1
Oiler
Page 5 of 8