3
Please read these instructions and retain for future use.
All products manufactured and supplied by Heritage are safe, provided they are installed correctly, used
correctly, and receive regular maintenance in accordance with these instructions.
If you are in any doubt about your ability to install this product safely you must employ the services of an
competent person who has experience of fitting products of this nature.
⚠
Before starting any installation project please consider the following:
• Prior to drilling into walls, check there are no hidden electrical wires or cables or water supply
pipes with the aid of an electrical detector.
• If you use power tools do not forget PPE:
- Wear eye protection.
- Unplug equipment after use.
• Keep electrical equipment away from sources of water.
•
This product must not be modified in any way as this will invalidate the guarantee.
•
These fittings need to be installed in accordance with and meet the requirements of the Water
Supply regulations 1999 (Water Fittings) and current by-laws.
S A F E T Y N O T E S
S P E C I F I C AT I O N
OPERATING PRESSURE RANGE (BAR): TSBC04 - Min 0.3 bar, Max 5.0 bar
TSBC05 - Min 1.0 bar, Max 5.0 bar
MAXIMUM STATIC PRESSURE (BAR):
10 bar
INLET WATER TEMPERATURE RANGE: Cold - Min 5
°
C, Max 25
°
C
Hot
-
Max
65
°
C
BS 6700 recommends the temperature of stored water should never exceed 65C. A stored water
temperature of 60C is considered sufficient to meet all nominal requirements and will minimise the build up
of limescale in hard water areas.
INLET CONNECTIONS:
1/2” BSP Flexible Tails
Note: When installing flexible tails screw in by hand, DO NOT OVERTIGHTEN. Also ensure that there are
no kinks, twists or loops in the flexible tails when connecting to prevent water supply issues.
