2
I N S TA L L AT I O N
Installation
1. Identify all components are present prior to
installation.
2. Fit the waste body (1) to the underside of the
bath using the rubber washer (2).
3. Fit the waste plate (3) to the bath using the foam
washer (4) as shown in the diagram. Secure using
the screw (5).
4.
Fit the overflow elbow (6) to the sink using the
overflow washer (7).
5.
Screw the overflow face (8) onto the thread of the
overflow elbow (6).
6. Connect the overflow tube (9) to the waste body
(1) and overflow elbow (6).
7. Check all joints and connections for leaks.
8.
See over the page for aftercare instructions.
1
Components
1. Waste Body
(x1)
2. Rubber Washer
(x1)
3. Waste Plate
(x1)
4. Foam Washer
(x1)
5. Screw
(x1)
6. Overflow Elbow
(x1)
7. Overflow Washer (x1)
8. Overflow Face
(x1)
9. Overflow Tube
(x1)
5
2
4
3
9
8
7
6
