Heritage Bathrooms Freestanding Baths, Руководство по установке

Страница: 5 / 16

05
Installation
If the bath is being installed on a suspended wooden floor or non-ground floor level, make suitable
provision to strengthen the floor. A structural engineer may be required to conduct a risk assessment.
Do not assume the floor is strong enough without making a suitable assessment.
1
Peel back the protective coating around the unfitted openings, where applicable. To prepare the bath, place
it face up on a dust sheet or protective blanket to prevent damage to the visible areas of the bath.
Do not stand in the bath during the installation.
2
Caution - Check ceiling strength
Protective film removed
around openings