Installation Manual
9
Specifications
Operating Environment
: 0° F to 105°, 10 to 95% RH (indoor use only)
MPS100 MicroZone Power Supply
Input Voltage:
120VAC, 0.1A, 50/60Hz
Output Supply:
200mA max output at 9 VDC
Output Capacity:
Maximum of 5 MicroZone Controllers within 200 feet using 18AWG, two-
conductor wire.
MC110A MicroZone Controllers
Input Power:
9VDC
Temperature Specifications:
+/-
2 degrees Fahrenheit at 30’
+/-
2.5 degrees Fahrenheit at 2000’ using 22AWG two-conductor cable
+/-
2.5 degrees Fahrenheit at 5000’ using 18AWG two-conductor cable
Communications Output Capacity:
Maximum of 12 MPM MicroZone Power Modulators within 500
feet using 18AWG two-conductor wire.
MPM100 MicroZone Power Modulator
Input Power:
120/240VAC, 16A Maximum
Load Rating:
0-120VAC or 0-240VAC (2kW@120V or 4kw@240V Maximum)
Load Type:
Resistive or Incandescent
Electrical protection:
Short circuit, overload and voltage surge
Noise filter:
FM radio filter
Enclosures
: Weather
tight (approximately 4” x 4” x 2”)
IMPORTANT:
Do not exceed the listed Load Rating and Operating Environment limits, or attempt to use the
MicroZone as an electronic speed control for electric motors.
Service
For assistance, make sure you have checked the parameters on the MicroZone. If you still need
assistance, contact:
1400 Madison Ave, Suite 504 Mankato, MN 56001
PH: 507-344-8005 FAX: 507-344-8009
www.herdstar.com
