Ру
сский
ITALIANO
DEUTSCH
NE
DE
RL
AN
DS
ENGLISH
ESPAÑOL
PORTUGUÊS
FRANÇAIS
XPS 2.0 60
User Manual – 3/8
1.3.
Recommendations
- Place your satellite speakers on a flat surface to avoid the risk of the speakers falling.
- Never open up your speaker kit, as you risk damaging its internal components.
- This speaker kit is intended for use in a temperate environment.
- To prevent the risk of fire or electrical discharge, keep your speaker kit away from:
- rain or humidity, as well as all fluids (water, chemical products or any other liquids),
- sources of heat such as heaters, stoves or any other heat-producing devices (including
amplifiers),
- direct sunlight.
- Do not expose your speaker kit to drips or splashes of water.
- Never place any object filled with liquid (a glass, vase...) on your speaker kit.
-
Warning :
The electrical consumption of this system in Standby mode is 1.5W.
- Unplug the speaker kit's power cord if you do not plan on using your speaker kit for an
extended period of time. To disconnect the power cord, take hold of and pull on the plug;
never pull on the cord itself.
- Make sure that the speaker kit's power plug connected to an electrical outlet remains easily
accessible.
- Disconnect the speaker kit before cleaning. Use a damp cloth and avoid using aerosol
cleaners.
- The speaker kit's power plug serves to power off the device and must therefore be easily
accessible at all times.
- Attention: at full power, prolonged listening with headphones may cause damage to the
user's ears and hearing.
- Markings are located on the back of the speakers.
2.
INSTALLING YOUR XPS 2.0 60 SPEAKER KIT
2.1.
Positioning the speaker kit
1.
Place the satellite speakers on a desk to either side of your monitor, keeping them at least
50cm away from the side walls.
2.
Place the speakers at an equal distance from the listener and direct them towards the
listening position.