![Hercules SAL Ergo Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/hercules/sal-ergo/sal-ergo_user-manual_2125776015.webp)
HERCULES COMPLETE LIFTING SOLUTIONS
WWW.HERCULES.COM.AU
P a g e
14 | 17
▪
Lead-
acid batteries are subjected to ‘self
-
discharge’. For this
reason, the snap-on battery should be
recharged after a maximum of three weeks of disuse.
▪
The charger automatically switches to trickle charging so overcharging is not possible.
▪
Do not leave the battery discharged or half discharged. Always charge immediately after use.
▪
The optimum temperature for charging is 20
–
25 °C. Too cold or too warm has a negative effect on
the capacity.
If the battery has not been fully charged or tends to lose charge too rapidly, this will not only reduce
the speed of the Hercules LITE but also reduce the capacity. It may move into the overload mode
as a result, even with light loads. See Operation [4.3.3]
5.1.1
Battery charger
High performance is achieved by 2-step automatic und digital control engineering. This allows for quick
charging in the first step, then compensation/trickle charging in the second step. It is possible to check the
condition of the battery. With LCD display and revolving mains plug.
1.
Connect the charging unit to the battery
2.
The off-load voltage of the battery is shown on the display
3.
Plug the charging unit into the mains
4.
The charging operation begins
Once the battery is fully charged, the charging unit switches over to compensation/trickle charge. On the
display, the battery symbol is shown with 4 bars and remains solid.
If charging does not begin, there are two possible reasons:
Connect the battery charger with the battery (without plugging into the mains) After approximately 9
seconds the test result is displayed (off-load voltage of the battery)